Firmware Information –
Device – Huawei P10 Plus
Model – VKY-L29
Android Version – 7.0
EMUI Version – 5.1
Firmware – B133
Build Number – (VKY-L09C432B133)
Region – europe
Status – Official
Type – Full firmware image
Changes – Changelog
1) Requirements for this method.
You need to unlock the bootloader of Huawei P10 Plus first, Skip it if you already had it unlocked.
Download the above three files and rename the “update_data_full_public.zip” file to update_data_public.zip and the second data file “update_full_VKY-xx_hw_xx.zip” to update_all_hw.zip.
2) First, download the HWOTA_VKY.zip from above and extract it on your PC or your device SD Card.
3) Now download all three update, data, and public files (make sure you rename the files as mentioned above) and copy them either in the external SDCard inside HWOTA folder or in the PC in the C:..HWOTAupdate folder.
4) Run the update.bat file as an administrator, It will ask you if you copied the files. Press any key to continue.
5) Now connect your device and Reboot into Bootloader mode using “Volume Down + Power” or just use “adb reboot bootloader” then press any key.
6) The above step will install TWRP in your device.
7) Now Disconnect USB Cable and turn off your device and use “Volume Up + Power” to enter TWRP.
8) Once you’re in TWRP mode, plug in the USB cable again and press the Enter key on your computer.
9) If your files are saved in the HWOTA folder on the SD card, type 1 and press ENTER and if files are saved in the HWOTA/Update folder on your PC, type 2 and press ENTER.
10) It’ll ask you the update type, again type 1 and press the Enter button twice.
11) Done! Above step will start the installation of files on your device