ROM Phone HUAWEI C8817D - ROM Android 4.4.4

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B267

1 increase operational stability;
2 in the Google patches;
3 update contact Po number APK:

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B266

1 Shenzhen NFC optimization problem;
2 optimization calls, solve the low probability of a partial region of the problem can not be connected to the phone;
3 in the Google patches enhance system stability, security;
4 resolve drops taxi could not locate;

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B265

1, optimization Shenzhen NFC issue;
2, optimization calls, addressing the low probability of a partial region of the problem can not be connected to the phone;
3, combined into Google in patches to enhance the system stability, security;

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B262

1 NFC solve a leakage test pressure, high temperature, such as CPU restart;
2 optimized call function to solve the low probability of some areas not connected phone problem;
3 in into Google patches enhance system stability, security;

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B260

1 SPK prone solve stop or switch from burning boost when the problem;
2 optimized call function to solve the low probability of some areas not connected phone problem;
3 in into Google patches enhance system stability, security;

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B250

1 optimization NFC functionality, fit more nfc equipment;
2 optimized call function to solve the low probability of some areas not connected phone problem;
3-in into Google patches enhance system stability, security;

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B246

1. Increase the version running stability
2. Talk to solve compatibility issues in some areas, and optimize voice calls
3. Optimize WLAN Direct Connect, Huawei camera camera

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B245

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B244

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B243

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B242

————————————————————————————————————————————————–

Update Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B241

————————————————————————————————————————————————–

Official ROM HUAWEI C8817D Telecom version: C8817DV100R001C92B237

Google service&login include – No Rooted

Language support: AR/BN/DE/EN/ES/HI/IN/PT/RU/TA/TE/TH/TL/TR/VI/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Honor 4A SCL-AL00 – ROM Android 5.1

ONLY Qualcomm Snapdragon 210 MSM8909

Update Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B160 – Netcom

—————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B150 – Netcom

—————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B140 – Netcom

—————————————————————————————————————————————————–

Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B136 – Netcom

Google service&login include – No Rooted

Language support: Multilang

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Honor 7 PLK-AL10 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B173 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B162 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B150 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B132 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B108 – Emotion UI 3.1 – Netcom

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Honor 7 PLK-CL00 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-CL00 version:  PLK-CL00 C92B173 – Emotion UI 3.1 – Telecom

——————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-CL00 version:  PLK-CL00 C92B162 – Emotion UI 3.1 – Telecom

——————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-CL00 version:  PLK-CL00 C92B151 – Emotion UI 3.1 – Telecom

——————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-CL00 version:  PLK-CL00 C92B132 – Emotion UI 3.1 – Telecom

——————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-CL00 version:  PLK-CL00 C92B100 – Emotion UI 3.1 – Telecom

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone Honor 7 PLK-TL01H – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B173 – Emotion UI 3.1 – Mobile

Changelog:

1, repair Alipay unavailable fingerprint payment problems

——————————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B162 – Emotion UI 3.1 – Mobile

Changelog:

[Camera]
Focus optimized to enhance the success rate

【Status Bar】
Repair of low probability notification bar drop-down menu disappears

[System]
Optimized to enhance system stability
Power Optimization particular scene

[Sports Health]
Optimized Desktop widget displays
Repair pedometer switch off automatically open

[WLAN]
Under certain scenarios WLAN repair rate is low

[Data Service]
Unable to access repair just finished upgrading specific scenarios

[Intelligent screenshots]
Update optimization vendor logo

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B150 – Emotion UI 3.1 – Mobile

Changelog:

[Recommended]
  Added Open Zhiling key voice interface API, for developers to use APP
  New fingerprint navigation features
  New Raster holster Animation

[System]
  Optimized to enhance system stability
  Power Optimization particular scene
  Optimized to enhance finger on the fingerprint to the screen light speed

[Camera]
  Optimization of each scene photo effects
  Optimization of Face AF
  Repair of low probability touch focus does not take effect

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B132 – Emotion UI 3.1 – Mobile

Changelog:

[Recommended]
  Add boot wizard added voice wake-up guide
  New anti inadvertently function leather

[System]
  Optimized to enhance system stability
  Power Optimization particular scene
  Optimized to enhance the performance of specific scenarios: including fingerprint unlocking, photographs, etc.

——————————————————————————————————————————————————-

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B125 – Emotion UI 3.1 – Mobile

Changelog:

1, optimizing stability intelligent remote control
2, optimized touch-screen stability
3, optimization of stability talkback

——————————————————————————————————————————————————-

Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B107 – Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone Honor 7 PLK-UL00 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B173 – Emotion UI 3.1 – Unicom

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B162 – Emotion UI 3.1 – Unicom

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B150 – Emotion UI 3.1 – Unicom

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B132 – Emotion UI 3.1 – Unicom

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B121 – Emotion UI 3.1 – Unicom

———————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-UL00 version:  PLK-UL00 C17B103 – Emotion UI 3.1 – Unicom

Google service&login include – No Rooted

Language support: Multilang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Honor 7 PLK-TL00 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B173 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B162 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B150 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B132 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B120 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B101 – Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Honor 7i ATH-AL00 - ROM Android 5.1

ONLY Qualcomm Snapdragon 615 MSM8939

Update Official ROM HUAWEI Honor 7i ATH-AL00 version:  ATH-AL00 C00B122 – Emotion UI 3.1 – Netcom

—————————————————————————————————————————————————————-

Update Official ROM HUAWEI Honor 7i ATH-AL00 version:  ATH-AL00 C00B111 – Emotion UI 3.1 – Netcom

—————————————————————————————————————————————————————-

Official ROM HUAWEI Honor 7i ATH-AL00 version:  ATH-AL00 C00B103 – Emotion UI 3.1 – Netcom

Gapps not include – No Rooted

Language support: Multilang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile HUAWEI Glory 4X 2G Ram Mobile - ROM Android 5.0

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B200 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B181 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B180 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B170 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B170 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B160 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B161 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B140 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B140 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B131 – EMUI3.0 - Mobile – 2G ram – Android 4.4

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Glory 4X 2G Ram Mobile - ROM Android 5.0

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B200 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B180 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B170 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B161 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B140 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Official ROM Glory 4X high version : Che-TL00H-V100R001C00B131 – EMUI3.1 – Netcom – 2G ram

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile HUAWEI Honor 4A SCL-CL00 – ROM Android 5.1

ONLY Qualcomm Snapdragon 210 MSM8909

Update Official ROM HUAWEI Honor 4A SCL-CL00 version: EMUI3.1 – SCL-CL00-C92B160 – Telecom

——————————————————————————————————————————————————-

Update Official ROM HUAWEI Honor 4A SCL-CL00 version: EMUI3.1 – SCL-CL00-C92B150 – Telecom

——————————————————————————————————————————————————-

Official ROM HUAWEI Honor 4A SCL-CL00 version: EMUI3.1 – SCL-CL00-C92B121 – Telecom

Google service&login include – No Rooted

Language support: EN/CN

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Honor 4A SCL-TL00 – ROM Android 5.1

Update Official ROM HUAWEI Honor 4A SCL-TL00 version: EMUI3.1 – SCL-TL00-C00B160 – hight version – Mobile

———————————————————————————————————————————————————————————

Official ROM HUAWEI Honor 4A SCL-TL00 version: EMUI3.1 – SCL-TL00-C00B150 – hight version – Mobile

Google service&login include – No Rooted

Language support: EN/CN

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Honor 4C CHM-U01 – ROM Android 4.4.2

ONLY HiSilicon KIRIN620

Official ROM HUAWEI Honor 4C CHM-U01 version: EMUI3.0 – CHM-U01 V100R001C185B067

Gapps include – No Rooted

Language support: Multilang

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Huawei SCL-U31 – ROM Android 5.1.1

ONLY MSM8909

Official ROM Huawei SCL-U31 version: EMUI3.1 – SCL-U31C185B001

Gapps include – No Rooted

Language support: Multilang

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.