Quantcast
Channel: » HUAWEI
Viewing all 1129 articles
Browse latest View live

CyanogenMod 13

$
0
0

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<


CyanogenMod (pronounced /s.ˈæn..ˌɛn.mɒd/) is an open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is developed as free and open source software based on the official releases of Android by Google, with added original and third-party code. It is based on a rolling release development model.

CyanogenMod offers features and options not found in the official firmware distributed by mobile device vendors. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, Privacy Guard (per-application permission management application), support for tethering over common interfaces, CPU overclocking and other performance enhancements, unlockable bootloader and root access, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as Wi-Fi, Bluetooth and GPS), and other interface enhancements. CyanogenMod does not contain spyware or bloatware, according to its developers. CyanogenMod is also stated to increase performance and reliability compared with official firmware releases.

Although only a subset of total CyanogenMod users elect to report their use of the firmware, as of June 2014, CyanogenMod has recorded over 12 million active installs on a multitude of devices.

In 2013, project founder Steve Kondik announced that venture funding had been obtained to establish Cyanogen Inc. as a commercial enterprise to develop and market the firmware more widely. This announcement has led to controversy within the community, with some developers asserting that rights and licensing issues, acknowledging/compensating past developers and honoring the original ethos of the community project, are not being adequately addressed. These claims were rejected by Kondik, who affirmed support for the community and stated that most CyanogenMod code, as with Android generally, is bound by a non-restrictive Apache license.

CyanogenMod 13

The first nightly release of CyanogenMod 13.0, based on Android 6.0, was released on 23 November 2015 for a small number of devices, but was gradually developed for other devices.

A few weeks later, CyanogenMod was given a minor update, and was based on Android 6.0.1.

 

CHANGELOG:

  • Updated CM13 sources to 17/01/2016

 

STATUS: 

It boots successfully, display works, touchscreen & buttons, GPS, Wifi, Bluetooth, Audio, Video playback (software decoding), Camera all work ok.

Phone/Data – Needs testing ! Rild & libril now built from source using custom libril based on CM13 hardware/ril-caf with a commit from LegacyHuawei.

Internal & External SD Card – Internal set as primary storage, External is adoptable.

Known Issues:

Wifi – When configuring wifi during the setup wizard, wifi connects to the access point but sometimes doesn't make an internet connection. Skip through the setup wizard, go to Settings -> Wifi, turn off wifi, turn it back on and it will connect successfully.

Mobile Data – If mobile does not connect when enabled, turn on aeroplane mode, wait a few seconds then turn off aeroplane mode. When the phone reconnects to the network it should also successfully connect the mobile data. Now that the initial connection has been made, you should be able to disable and enable mobile data as required and it will connect.

    

BUG:

  • Video playback (hardware decoding)
  • FM Radio

 

INSTALLATION:

  • Wipe system, data, cache and dalvik
  • Flash ROM
  • Flash Gapps
  • Reboot system
  • Enjoy!

 

CREDITS:

 

NOTE: to install this ROM, unlocked bootloader and custom recovery are required.


Honor 6 (L04) B803 Marshmallow OTA Zip [EMUI 4.0] [Beta]

$
0
0

OTA Details


Device: Huawei Ascend Mate 7


Models: MT7-L09/MT7-TL10


Android: v6.0 Marshmallow


EMUI: 4.0


Firmware: B511


Build Number: MT7-L09C185B511/MT7-TL10C185B511


Required Version: B326


Region: Middle East/Africa


Country: Egypt


Date: 21.01.2016


Status: Official (beta)


Type: Incremental OTA


File Name: update.zip

 

 

SlimLP Beta 0.14

$
0
0

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<

About:

SlimRoms is a custom android operating system built from Android Open Source Project (AOSP). Our aim is to offer a clean, fast and high-quality experience on all your devices.

SlimRoms simplifies the Android experience while reducing a lot of the unnecessary overhead that might be found within. As such, it provides a good experience for most Android purists and those who are looking to bring an older device out of the dark ages and back into the golden light of Android.

SlimRoms offer you the choice of just exactly how bare bones you want to go with a ROM. When you download the ROM, you’re given with the choice between three different versions of Google Apps: a mini-version that is limited to basic services (such as the login services), a normal variant that includes Search, Music, and YouTube, and a full version that also provides Chrome, Drive, and all the other Google Apps you’ve come to love.

 

Changelog (07/01/2016):

For a detailed changelog of the Slim source code see the Slim Gerrit.

  • SlimLP 5.1.1 sources 07/01/16 – Update to android-5.1.1_r33 (January 2nd security patch)
  • Cherry-picked Layers RRO2.1 support

 

Status:

Works – Wifi (unstable), RIL (Calls, SMS, Data), Audio, Camera (still photos & video recording), GPS, Bluetooth, Video playback (software codecs)

Don't work -  Video playback (hardware codecs), FM Radio

Credits:

To install this ROM, unlocked bootloader and custom recovery (TWRP 2.6.3.3 or higher) are required.

CyanogenMod 13

$
0
0

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<


CyanogenMod (pronounced /s.ˈæn..ˌɛn.mɒd/) is an open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is developed as free and open source software based on the official releases of Android by Google, with added original and third-party code. It is based on a rolling release development model.

CyanogenMod offers features and options not found in the official firmware distributed by mobile device vendors. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, Privacy Guard (per-application permission management application), support for tethering over common interfaces, CPU overclocking and other performance enhancements, unlockable bootloader and root access, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as Wi-Fi, Bluetooth and GPS), and other interface enhancements. CyanogenMod does not contain spyware or bloatware, according to its developers. CyanogenMod is also stated to increase performance and reliability compared with official firmware releases.

Although only a subset of total CyanogenMod users elect to report their use of the firmware, as of June 2014, CyanogenMod has recorded over 12 million active installs on a multitude of devices.

In 2013, project founder Steve Kondik announced that venture funding had been obtained to establish Cyanogen Inc. as a commercial enterprise to develop and market the firmware more widely. This announcement has led to controversy within the community, with some developers asserting that rights and licensing issues, acknowledging/compensating past developers and honoring the original ethos of the community project, are not being adequately addressed. These claims were rejected by Kondik, who affirmed support for the community and stated that most CyanogenMod code, as with Android generally, is bound by a non-restrictive Apache license.

CyanogenMod 13

The first nightly release of CyanogenMod 13.0, based on Android 6.0, was released on 23 November 2015 for a small number of devices, but was gradually developed for other devices.

A few weeks later, CyanogenMod was given a minor update, and was based on Android 6.0.1.

 

CHANGELOG:

  • Updated CM13 sources to 24/01/2016

 

STATUS: 

It boots successfully, display works, touchscreen & buttons, GPS, Wifi, Bluetooth, Audio, Video playback (software decoding), Camera all work ok.

Phone/Data – Needs testing ! Rild & libril now built from source using custom libril based on CM13 hardware/ril-caf with a commit from LegacyHuawei.

Internal & External SD Card – Internal set as primary storage, External is adoptable.

Known Issues:

Wifi – When configuring wifi during the setup wizard, wifi connects to the access point but sometimes doesn't make an internet connection. Skip through the setup wizard, go to Settings -> Wifi, turn off wifi, turn it back on and it will connect successfully.

Mobile Data – If mobile does not connect when enabled, turn on aeroplane mode, wait a few seconds then turn off aeroplane mode. When the phone reconnects to the network it should also successfully connect the mobile data. Now that the initial connection has been made, you should be able to disable and enable mobile data as required and it will connect.

    

BUG:

  • Video playback (hardware decoding)
  • FM Radio

 

INSTALLATION:

  • Wipe system, data, cache and dalvik
  • Flash ROM
  • Flash Gapps
  • Reboot system
  • Enjoy!

 

CREDITS:

 

NOTE: to install this ROM, unlocked bootloader and custom recovery are required.

Huawei_A820T_Files_to_FlashTool_&_NVRAM

$
0
0

Categories:

Hardware : MT6572 Model : huawei Build number : Android.L7RET.BXC.FWVGA.F7.0723.V3.02 Build date UTC : 20130724-034428 Android  v : 4.2.2 Baseband v: MOLY.WR8.W1319.MD.TG.MP.V1.P2, 2013/07/22 17:56 Kernel v : 3.4.5 (mc@mc-desktop) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP  Wed Jul 24 11:40:11 CST 2013 Uboot build v :  root shellLCDDriverIC:1 otm8018b_dsi_6572_fwvga  

(Read more...)

Enjoy 5S TAG-AL00

$
0
0

ROM Mobile Enjoy 5S TAG-AL00 – ROM Android 5.1

ONLY MT6753

Update Official ROM HUAWEI Enjoy 5S TAG-AL00 version:  TAG-AL00 C00B126 – Emotion UI 3.1 – Netcom

—————————————————————————————————————————————————————————

Official ROM HUAWEI Enjoy 5S TAG-AL00 version:  TAG-AL00 C00B124 – Emotion UI 3.1 – Netcom

Gapps not include – No Rooted

Language support: Multilang

 

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Firmware P8 lite ALE-L21C432525

$
0
0

Installation


1. download zip package


2. place to dload folder in your memory


3. make local update


Important – i make upgrade from firmware C432B188 and all features work, so i really recomended to install first this firmware and than make local update (first install B170 and than about 100 MB update to B188)

huawei G620-UL01


Huawei Mate S B303 Marshmallow OTA Zip [Beta] [Europe]

$
0
0

OTA Details

  • Device: Huawei Mate S
  • Model: CRR-L09
  • Android: v6.0 Marshmallow
  • EMUI: 4.0
  • Firmware: B303
  • Build Number: CRR-L09C432B303
  • Required Version: B145
  • Cust Version: CUSTC432D001
  • Date: 3.02.2016
  • Region: Europe
  • Country: Germany
  • Status: Official (beta)
  • Type: Incremental OTA package
  • File Name: update.zip

How to Update

This OTA requires your Mate S to be already running the B145 firmware with C432D001 (European) branding.

 
  1. Download the OTA package and rename it as ‘update.zip’ if it doesn’t have that name already.
  2. Copy update.zip into the ‘dload’ folder of the external microSD card of your Mate S.
  3. You can create a new dload folder in case it’s absent.
  4. Before proceeding, it is highly recommended that you take a full backup of your system first.
  5. Finally, open the Updater app, and perform Local update.

Huawei G8 B130a Lollipop Firmware [Italy] [Vodafone]

$
0
0

Firmware Details

  • Device: Huawei G8
  • Model: RIO-L01
  • Carrier: Vodafone
  • Android: v5.1 Lollipop
  • EMUI: 3.1
  • Firmware: B130a
  • Build Number: RIO-L01C02B130a
  • Cust Number: CUSTC02D004
  • Region: Europe
  • Country: Italy
  • Release Date: 5-01-2016
  • Status: Official
  • Type: Full firmware image
  • File Name: Huawei G8 Driver(RIO-L01, Android 5.1, EMUI 3.1, C02B130aCUSTC02D004, Italy, Vo

     

    It is important to note that you can only install this firmware on the Vodafone branded Huawei G8 carrying C02D004 cust number.

     

    To install this firmware:

     
  • Download the Zip package and extract its contents.
  • Connect your device to the PC in MTP mode.
  • Transfer the ‘dload’ folder (step 1) to the top-level directory of your phone’s microSD card.
  • Take a backup of your current data and apps using the native app or HiSuite.
  • Finally perform Local Update from Settings > Updates > Menu.

 

 

Ascend Mate 7 B513 – MT7-L09 Marshmallow OTA Zip [Beta] [Europe]

$
0
0

OTA Details





Device: Huawei Ascend Mate 7


Model: MT7-L09


Codename: Jazz (L09)


Android: v6.0 Marshmallow


Version: MRA58K


EMUI: 4.0


Firmware: B513


Build Number: MT7-L09C432B513


Required Version: B331


Date: 6.02.2016


Region: Europe


Status: Official (beta)


Type: Incremental OTA


File Name: update.zip

How to Update

 

1. Pre-requisites
This OTA can only be installed on MT7-L09 Ascend Mate 7 variant already running the C900B331 Lollipop firmware.
The device needs to have the stock Lollipop recovery and the system should not be rooted/modified.
Make sure there’s more than 40% charge left in the battery.

2. Installation
Step 1: Download “update.zip” OTA package from the mirror provided above.
Step 2: Create a new folder named ‘dload’ inside the top level directory of your Mate 7’s microSD card.
Step 3: Disconnect your device from the PC when transfer completes.
Step 4: Open the Updater app, tap menu, select Local update, choose the update.zip package and confirm its installation.
Step 5: [Manual installation] After copying the OTA package, turn your phone off and reboot while holding Vol up + Power till you enter the stock recovery. Select apply update from SD card, choose the update.zip package and flash it.

 

 

SlimLP Beta 0.15

$
0
0

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<

About:

SlimRoms is a custom android operating system built from Android Open Source Project (AOSP). Our aim is to offer a clean, fast and high-quality experience on all your devices.

SlimRoms simplifies the Android experience while reducing a lot of the unnecessary overhead that might be found within. As such, it provides a good experience for most Android purists and those who are looking to bring an older device out of the dark ages and back into the golden light of Android.

SlimRoms offer you the choice of just exactly how bare bones you want to go with a ROM. When you download the ROM, you’re given with the choice between three different versions of Google Apps: a mini-version that is limited to basic services (such as the login services), a normal variant that includes Search, Music, and YouTube, and a full version that also provides Chrome, Drive, and all the other Google Apps you’ve come to love.

 

Changelog (06/02/2016):

For a detailed changelog of the Slim source code see the Slim Gerrit.

  • SlimLP 5.1.1 sources 06/02/16 – Update to android-5.1.1_r34 (February 1st security patch)
  • Cherry-picked Layers RRO2.1 support
  • Kernel Updates:
    • Increase camera heap size – 5MP photos should now work

 

Status:

Works – Wifi (unstable), RIL (Calls, SMS, Data), Audio, Camera (still photos & video recording), GPS, Bluetooth, Video playback (software codecs)

Don't work -  Video playback (hardware codecs), FM Radio

Credits:

To install this ROM, unlocked bootloader and custom recovery (TWRP 2.6.3.3 or higher) are required.

CyanogenMod 13

$
0
0

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<


CyanogenMod (pronounced /s.ˈæn..ˌɛn.mɒd/) is an open-source operating system for smartphones and tablet computers, based on the Android mobile platform. It is developed as free and open source software based on the official releases of Android by Google, with added original and third-party code. It is based on a rolling release development model.

CyanogenMod offers features and options not found in the official firmware distributed by mobile device vendors. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, Privacy Guard (per-application permission management application), support for tethering over common interfaces, CPU overclocking and other performance enhancements, unlockable bootloader and root access, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as Wi-Fi, Bluetooth and GPS), and other interface enhancements. CyanogenMod does not contain spyware or bloatware, according to its developers. CyanogenMod is also stated to increase performance and reliability compared with official firmware releases.

Although only a subset of total CyanogenMod users elect to report their use of the firmware, as of June 2014, CyanogenMod has recorded over 12 million active installs on a multitude of devices.

In 2013, project founder Steve Kondik announced that venture funding had been obtained to establish Cyanogen Inc. as a commercial enterprise to develop and market the firmware more widely. This announcement has led to controversy within the community, with some developers asserting that rights and licensing issues, acknowledging/compensating past developers and honoring the original ethos of the community project, are not being adequately addressed. These claims were rejected by Kondik, who affirmed support for the community and stated that most CyanogenMod code, as with Android generally, is bound by a non-restrictive Apache license.

CyanogenMod 13

The first nightly release of CyanogenMod 13.0, based on Android 6.0, was released on 23 November 2015 for a small number of devices, but was gradually developed for other devices.

A few weeks later, CyanogenMod was given a minor update, and was based on Android 6.0.1.

 

CHANGELOG:

  • Updated CM13 sources to 07/02/2016
  • Kernel: Increase camera heap size

 

STATUS: 

It boots successfully, display works, touchscreen & buttons, GPS, Wifi, Bluetooth, Audio, Video playback (software decoding), Camera all work ok.

Phone/Data – Needs testing ! Rild & libril now built from source using custom libril based on CM13 hardware/ril-caf with a commit from LegacyHuawei.

Internal & External SD Card – Internal set as primary storage, External is adoptable.

Known Issues:

Wifi – When configuring wifi during the setup wizard, wifi connects to the access point but sometimes doesn't make an internet connection. Skip through the setup wizard, go to Settings -> Wifi, turn off wifi, turn it back on and it will connect successfully.

Mobile Data – If mobile does not connect when enabled, turn on aeroplane mode, wait a few seconds then turn off aeroplane mode. When the phone reconnects to the network it should also successfully connect the mobile data. Now that the initial connection has been made, you should be able to disable and enable mobile data as required and it will connect.

    

BUG:

  • Video playback (hardware decoding)
  • FM Radio

 

INSTALLATION:

  • Wipe system, data, cache and dalvik
  • Flash ROM
  • Flash Gapps
  • Reboot system
  • Enjoy!

 

CREDITS:

 

NOTE: to install this ROM, unlocked bootloader and custom recovery are required.

Huawei Y625-U21

$
0
0

Categories:

Official Huawei Y625-U21 ROM Android 4.4.2 ROM Version: Y625-U21V100R001C577B110 Language Support: Multilanguage   NOTE: Installation steps included with the RAR file.

(Read more...)

HUAWEI MEDIAPAD Youth S7-701u

$
0
0

Categories:

HUAWEI MEDIAPAD Youth S7-701u Version: S7-701u_FIRMWARE_Android4.1_C232B008_General_Channel_05011XSY

(Read more...)


Honor 7 PLK-TL01H

$
0
0

ROM Phone Honor 7 PLK-TL01H – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B190 – Emotion UI 3.1 – Mobile

——————————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B188 – Emotion UI 3.1 – Mobile

——————————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B173 – Emotion UI 3.1 – Mobile

Changelog:

1, repair Alipay unavailable fingerprint payment problems

——————————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B162 – Emotion UI 3.1 – Mobile

Changelog:

[Camera]
Focus optimized to enhance the success rate

【Status Bar】
Repair of low probability notification bar drop-down menu disappears

[System]
Optimized to enhance system stability
Power Optimization particular scene

[Sports Health]
Optimized Desktop widget displays
Repair pedometer switch off automatically open

[WLAN]
Under certain scenarios WLAN repair rate is low

[Data Service]
Unable to access repair just finished upgrading specific scenarios

[Intelligent screenshots]
Update optimization vendor logo

 

 

——————————————————————————————————————————————————-

 

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B150 – Emotion UI 3.1 – Mobile

Changelog:

[Recommended]
  Added Open Zhiling key voice interface API, for developers to use APP
  New fingerprint navigation features
  New Raster holster Animation

[System]
  Optimized to enhance system stability
  Power Optimization particular scene
  Optimized to enhance finger on the fingerprint to the screen light speed

[Camera]
  Optimization of each scene photo effects
  Optimization of Face AF
  Repair of low probability touch focus does not take effect

 
——————————————————————————————————————————————————-

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B132 – Emotion UI 3.1 – Mobile

Changelog:

[Recommended]
  Add boot wizard added voice wake-up guide
  New anti inadvertently function leather

[System]
  Optimized to enhance system stability
  Power Optimization particular scene
  Optimized to enhance the performance of specific scenarios: including fingerprint unlocking, photographs, etc.

——————————————————————————————————————————————————-

Update Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B125 – Emotion UI 3.1 – Mobile

Changelog:

1, optimizing stability intelligent remote control
2, optimized touch-screen stability
3, optimization of stability talkback

——————————————————————————————————————————————————-

Official ROM HUAWEI Honor 7 PLK-TL01H version:  PLK-TL01H C01B107 – Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

 

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Huawei P8 B317 Marshmallow Firmware

$
0
0

Firmware Details





Device: Huawei P8


Model: GRA-L09


Android: v6.0 Marshmallow


EMUI: 4.0


Firmware: B317


Build: GRA-L09C432B317


Region: Europe


Country: Spain


Branding: Open Market


Status: Official (stable)


Type: Full firmware image


Release Date: 19-02-2016


File Name: GRA-L09_C432B317_Firmware_Europe_Android6.0_EMUI4.0.zi p

How to Update

Compatibility: Make sure you install this update on the European Huawei P8 (L09) variant only, otherwise you’re going to end up with your phone stuck in bootloop.

 

Step 1: Download “GRA-L09_C432B317_____Android6.0_EMUI4.0.zip” from the above-mentioned mirror and extract its contents.

Step 2: Now transfer the resulting dload folder to your P8’s microSD card.

Step 3: [Optional] Take a full backup of your important stuff using HiSuite or Huawei’s native backup utility.

Step 4: When the transfer completes, unplug the USB cable and turn your phone off.

 

Step 5: Press & hold Vol up + Vol down + Power for a few seconds. Release the keys as soon as the upgrade kicks off.




 

Enjoy 5S TAG-TL00

$
0
0

ROM Phone Enjoy 5S TAG-TL00 – ROM Android 5.1

ONLY MT6753

Update Official ROM HUAWEI Enjoy 5S TAG-TL00 version: TAG-TL00 – C01B125 - Emotion UI 3.1 – Mobile

———————————————————————————————————————————————————-

Update Official ROM HUAWEI Enjoy 5S TAG-TL00 version: TAG-TL00 – C01B124 - Emotion UI 3.1 – Mobile

———————————————————————————————————————————————————-

Official ROM HUAWEI Enjoy 5S TAG-TL00 version: TAG-TL00 – C01B122a - Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

 

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Honor 7 PLK-TL00

$
0
0

ROM Mobile Honor 7 PLK-TL00 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B201 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B173 – Emotion UI 3.1 – Mobile

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B162 – Emotion UI 3.1 – Mobile

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B150 – Emotion UI 3.1 – Mobile

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B132 – Emotion UI 3.1 – Mobile

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B120 – Emotion UI 3.1 – Mobile

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B101 – Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

 

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Honor 7 PLK-AL10

$
0
0

ROM Mobile Honor 7 PLK-AL10 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B201 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B190 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B188 – Emotion UI 3.1 – Netcom

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B174 – Emotion UI 3.1 – Netcom

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B173 – Emotion UI 3.1 – Netcom

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B162 – Emotion UI 3.1 – Netcom

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B150 – Emotion UI 3.1 – Netcom

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B132 – Emotion UI 3.1 – Netcom

Changelog SelectShow>

 

————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-AL10 version:  PLK-TL00 C00B108 – Emotion UI 3.1 – Netcom

Gapps not include – No Rooted

Language support: EN/CN

 

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

Viewing all 1129 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>