ROM Mobile Honor 7 PLK-TL00 – ROM Android 5.0

ONLY Huawei HiSilicon Kirin 925

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B162 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B150 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B132 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B120 – Emotion UI 3.1 – Mobile

————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 7 PLK-TL00 version:  PLK-TL00 C01B101 – Emotion UI 3.1 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<

About:

SlimRoms is a custom android operating system built from Android Open Source Project (AOSP). Our aim is to offer a clean, fast and high-quality experience on all your devices.

SlimRoms simplifies the Android experience while reducing a lot of the unnecessary overhead that might be found within. As such, it provides a good experience for most Android purists and those who are looking to bring an older device out of the dark ages and back into the golden light of Android.

SlimRoms offer you the choice of just exactly how bare bones you want to go with a ROM. When you download the ROM, you’re given with the choice between three different versions of Google Apps: a mini-version that is limited to basic services (such as the login services), a normal variant that includes Search, Music, and YouTube, and a full version that also provides Chrome, Drive, and all the other Google Apps you’ve come to love.

What's working :

•        Wifi (Works but unstable)
•        RIL (Calls, SMS, Data)
•        Audio
•        Camera: Still photos & Video Recording
•        GPS
•        Bluetooth
•        Media: Video playback (Software codecs)

What's not working:

•        Media: Video playback (Hardware codecs)
•        FM Radio
•        ???

Credits:

•     SlimRoms Team
•     Dazzozo
•     fonz93
•     TeamHackLG
•     Christopher83
•     moddingg33k
•     mrg666
•     … and many more contributors!

To install this ROM, unlocked bootloader and custom recovery (TWRP 2.6.3.3 or higher) are required.

ROM Phone Huawei 3S C199s - ROM Android 4.4.4

ONLY Qualcomm Snapdragon 615 MSM8939

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B282 – EMUI3.0 – Telecom

Changelog:

Multilang

————————————————————————————————————————————————-

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B277 – EMUI3.0 – Telecom

Changelog:

[Recommended]
  1. Optimize Camera camera
  2. The probability of making a telephone call multi-party call interface problems to solve certain scenarios
  3. Optimize SD card compatibility, solve some special types of SD card can not identify the problem
  4. Optimize WLAN function to solve probability problems not scan WLAN hotspots
  5. solve probability into the charger is not charging problem
  6. Set the menu to add OTG switch options, enhanced usability OTG function

[NFC]
   Optimization NFC capabilities, enhanced NFC compatibility
  [Call]
   Optimization problem of dropped calls, and enhance the stability of the call
  [System]
   Fit into the Google security patches enhance system security, stability

————————————————————————————————————————————————-

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B270 – EMUI3.0 – Telecom

Changelog:

[Recommended]
  1. Optimize Camera photo effects
  Two new camera interface manually adjust the brightness function
  3. Optimizing the effect of the touch screen
  4. New user-defined signal bar icon style features

[NFC]
   Enhanced compatibility with NFC
  [Call]
   Enhance the stability of the call
  [System]
   Enhance the stability and optimization of power system

————————————————————————————————————————————————-

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B267 – EMUI3.0 – Telecom

Changelog:

1, and enhance the stability of the system
2, the goodness of the call termination rates

————————————————————————————————————————————————-

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B265 – EMUI3.0 – Telecom

Changelog:

1, and enhance the stability of the system
2, enhanced compatibility SD Card
3, when the settlement of international roaming icon displays an incorrect question

————————————————————————————————————————————————-

Update Official ROM Huawei 3S C199s version : C199s-V100R001C92B263 – EMUI3.0 – Telecom

Changelog:

1, enhance the stability of the system
2, enhances the stability of the data connection
3, to solve the problem can not be connected to a specific network VPN

————————————————————————————————————————————————-

Official ROM Huawei 3S C199s version : C199s-V100R001C92B260 – EMUI2.3 – Telecom

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Glory 4X 2G Ram Mobile - ROM Android 5.0

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B170 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B161 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Update Official ROM Glory 4X high version : Che-TL00H-V100R001C00B140 – EMUI3.1 – Netcom – 2G ram

——————————————————————————————————————————————————————–

Official ROM Glory 4X high version : Che-TL00H-V100R001C00B131 – EMUI3.1 – Netcom – 2G ram

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Glory H30-L02 4G LTE KK – ROM Android 4.4.2

ONLY CPU: Huawei HiSilicon KIRIN910 Hi6620 V9R1 + 1G Ram

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI3.0_ H30-L02V100R001CHNC00B271

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI3.0_ H30-L02V100R001CHNC00B268

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI3.0_ H30-L02V100R001CHNC00B266

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI3.0_ H30-L02V100R001CHNC00B256

Changelog:

1. Increase EMUI3.0 feature
2. Update Hai Siji line C55-> C56
3. Optimize System Performance

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI2.3_ H30-L02V100R001CHNC00B151

Changelog:

1. To improve the magazine can not download the upgrade package to unlock the problem.
2. To improve the problem of flash yellow.
3. Solve the campus network can not connect CMCC-EDU problems.
4. optimization system stability.

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI2.3_ H30-L02V100R001CHNC00B138

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI2.3_ H30-L02V100R001CHNC00B603 ( Developer version )

———————————————————————————————————————————————————–

Official ROM HUAWEI Glory H30-L02 4G LTE KK Mobile version: EMUI2.3_ H30-L02-V100R001CHNC00B132

———————————————————————————————————————————————————–

Update Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI2.3_ H30-L02V100R001CHNC17B134

———————————————————————————————————————————————————–

Official ROM HUAWEI Glory H30-L02 4G LTE KK Unicom version: EMUI2.3_ H30-L02V100R001CHNC17B130

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile HUAWEI Glory 4X 2G Ram Mobile - ROM Android 5.0

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B170 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B170 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B160 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B161 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Update Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B140 – EMUI3.0 - Mobile – 2G ram – Android 4.4

———————————————————————————————————————————————————————–

Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B140 – EMUI3.1 - Mobile – 2G ram – Android 5.0

———————————————————————————————————————————————————————–

Official ROM Glory 4X Low version : CHE-TL00-V100R001C01B131 – EMUI3.0 - Mobile – 2G ram – Android 4.4

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Glory H3C 4G TD-LTE - ROM Android 4.4.2

ONLY PROC: Huawei HiSilicon KIRIN910 Hi6620 V9R1 + RAM : 1G

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B271 – EMUI3.0

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B268 – EMUI3.0

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B266 – EMUI3.0

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B256 – EMUI3.0

Changelog:

1. Increase EMUI3.0 feature
2. Update Hai Siji line C55-> C56
3. Optimize System Performance

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B151

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B138

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B603 ( Developer version)

———————————————————————————————————————————————-

Update Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B132

———————————————————————————————————————————————-

Official ROM HUAWEI Glory H3C 4G TD-LTE "H30-L01" Mobile version: H30-L01V100R001CHNC00B119

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI GX1 – ROM Android 4.4.4

Update Official ROM HUAWEI GX1 SC-CL00 version: SC-CL00 V100R001C92B352 – Emotion UI 2.3 – Telecom

Changelog:

Multilang

———————————————————————————————————————————————————-

Update Official ROM HUAWEI GX1 SC-CL00 version: SC-CL00 V100R001C92B340 – Emotion UI 2.3 – Telecom

Changelog:

1. Optimize photo effects
2. Optimize preset applications
3. Update the list of pre-application
4. improve system stability, the probability of the system to solve the problem Caton
5. solving probability problems insensitive power button light up the screen
6. enhance voice call stability

———————————————————————————————————————————————————-

Official ROM HUAWEI GX1 SC-CL00 version: SC-CL00 V100R001C92B325 – Emotion UI 2.3 – Telecom

Google service&login include – No Rooted

Language support: EN/CN

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile Honor 6 Plus PE-TL00M – ROM Android 4.4.4

ONLY CPU: Huawei HiSilicon Kirin 925 + 3G Ram

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B192 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B186 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B185 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B182 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B173 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B160 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B150 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B145 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B133 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B120 – Emotion UI 3.0 – Mobile

————————————————————————————————————————————————————————————–

Official ROM HUAWEI Honor 6+ PE-TL00M Standard Edition version:  PE-TL00M-V100R001C01B112 – Emotion UI 3.0 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone Honor 6 Plus PE-TL20 – ROM Android 4.4.4

ONLY CPU: Huawei HiSilicon Kirin 925 + 3G Ram

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B192 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B186 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B185 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B182 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B173 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B160 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B150 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B145 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B133 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B120 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B112SP10 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Update Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B112 – Emotion UI 3.0 – Mobile

——————————————————————————————————————————————————————

Official ROM HUAWEI Honor 6+ PE-TL20 version:  PE-TL20 V100R001CHNC00B110 – Emotion UI 3.0 – Mobile

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Honor Pad Note T1-A21w – ROM Android 4.4.2

Update Official ROM Huawei Honor Pad Note T1-A21w version : EMUI 3.0 – T1-A21w-V100R001C233B006

———————————————————————————————————————————————————————

Update Official ROM Huawei Honor Pad Note T1-A21w version : EMUI 3.0 – T1-A21w-V100R001C233B005

———————————————————————————————————————————————————————

Official ROM Huawei Honor Pad Note T1-A21w version : EMUI 3.0 – T1-A21w-V100R001C233B003

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Look Tuto in the rom ( T1-A21w SD.pdf )

ROM Mobile P8Max DAV-703L – ROM Android 5.1

ONLY KIRIN935 + 3G Ram

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B021 – Netcom

——————————————————————————————————————————————————

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B017 – Netcom

——————————————————————————————————————————————————

Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B011 – Netcom

Google service&login include – No Rooted

Language support: Multilang

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Phone HUAWEI Honor 4A SCL-AL00 – ROM Android 5.1

ONLY Qualcomm Snapdragon 210 MSM8909

Update Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B140 – Netcom

—————————————————————————————————————————————————–

Official ROM HUAWEI Honor 4A SCL-AL00 version: EMUI3.1 – SCL-AL00-C00B136 – Netcom

Google service&login include – No Rooted

Language support: Multilang

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile HUAWEI Ascend Mate 7 MT7-UL00 – ROM Android 4.4.2

ONLY Huawei HiSilicon KIRIN920 Hi3630

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B133 – MT7-UL00 – Unicom

(Optimized) After updating preset uninstalled to uninstall applications, once successfully
(Optimization) player mode under holster not displayed by default music widget
(Optimization) together into the latest Google security patches to ensure the safety of mobile phones

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B127 – MT7-UL00 – Unicom

1. (new) Motion healthy function, can always see individual sports data, meter record every step you good health
2, (new) fingerprint answer the phone functions, just between you and me touch
3, (new) support micro-channel campaign steps explicitly in the latest micro-channel version, the drying out of power walking, sharing the joy of movement
4, (optimization) update Google the latest security patches, more secure, more at ease
5, (optimization) camera to adjust to the fingerprint fingerprints, photographs switch settings
6, (optimization) game centers and other applications can be uninstalled

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B126 – MT7-UL00 – Unicom

1. (optimization) updated with the latest security patches Google
2. (optimization) weather widget screen, display more friendly

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B125 – MT7-UL00 – Unicom

1, (optimization) updated with the latest security patches Google
2, (optimization) NFC compatibility enhancements
3, (solve) the adaptation of the Russian permanent Winter Time Zone
4, (solve) the problem contact a specific scene show NULL

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B123 – MT7-UL00 – Unicom

1. (optimization) boot speed multi-contact situations contacts
2. (optimization) Bluetooth, WLAN compatibility
3. (optimization) of the screen displays
4. (optimization) updated with the latest security patches Google

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B121 – MT7-UL00 – Unicom

1. (optimization) speed fingerprint to unlock
2. (new) anti-error trigger mode
3. (optimization) machine stability

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B120SP07 – MT7-UL00 – Unicom

—————————————————————————————————————————————————————————————-

Update Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B120 – MT7-UL00 – Unicom

—————————————————————————————————————————————————————————————-

Official ROM HUAWEI Ascend Mate 7 MT7-UL00 Unicom Version: MT7-V100R001C17B119 – MT7-UL00 – Unicom

Google service&login include – No Rooted

Language support: MultiLang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile HUAWEI Ascend Mate 7 MT7-TL00 – ROM Android 4.4.2

ONLY Huawei HiSilicon KIRIN925

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B133 – MT7-TL00 "Mobile", standard version

Changelog:

(Optimized) After updating preset uninstalled to uninstall applications, once successfully
(Optimization) player mode under holster not displayed by default music widget
(Optimization) together into the latest Google security patches to ensure the safety of mobile phones

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B127 – MT7-TL00 "Mobile", standard version

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B126 – MT7-TL00 "Mobile", standard version

1. (optimization) updated with the latest security patches Google
2. (optimization) weather widget screen, display more friendly

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B125 – MT7-TL00 "Mobile", standard version

1, (optimization) updated with the latest security patches Google
2, (optimization) NFC compatibility enhancements
3, (solve) the adaptation of the Russian permanent Winter Time Zone
4, (solve) the problem contact a specific scene show NULL

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B123 – MT7-TL00 "Mobile", standard version

1. (optimization) boot speed multi-contact situations contacts
2. (optimization) Bluetooth, WLAN compatibility
3. (optimization) of the screen displays
4. (optimization) updated with the latest security patches Google

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B122 – MT7-TL00 "Mobile", standard version

1. (optimization) WLAN compatibility
2. (new) desktop font size changes with the system font size
3. (optimization) fit into google patches, enhanced machine stability

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B121 – MT7-TL00 "Mobile", standard version

1. (optimization) speed fingerprint to unlock
2. (new) anti-error trigger mode
3. (optimization) machine stability

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B120SP07 – MT7-TL00 "Mobile", standard version

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B120 – MT7-TL00 "Mobile", standard version

—————————————————————————————————————————————————————————————————————

Update Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B119 – MT7-TL00 "Mobile", standard version

—————————————————————————————————————————————————————————————————————

Official ROM HUAWEI Ascend Mate 7 MT7-TL00 Mobile Version: MT7-V100R001C00B117 – MT7-TL00 "Mobile", standard version

Google service&login include – No Rooted

Language support: MultiLang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

ROM Mobile MT7-CL00 HUAWEI Ascend Mate 7 MT7-CL00 – ROM Android 4.4.2

ONLY Huawei HiSilicon KIRIN920 Hi3630

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B128 – MT7-CL00 "Telecom"

Changelog:

(Optimized) After updating preset uninstalled to uninstall applications, once successfully
(Optimization) player mode under holster not displayed by default music widget
(Optimization) together into the latest Google security patches to ensure the safety of mobile phones

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B128 – MT7-CL00 "Telecom"

Changelog:

1, (optimized) After updating preset uninstall uninstall applications, once successfully
2, (optimization) music player mode under the holster not displayed by default widget
3, (optimization) together into the latest Google security patches to ensure the safety of mobile phones

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B162 – MT7-CL00 "Telecom"

Changelog:

1, to achieve customer needs
2, to improve the stability

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B127 – MT7-CL00 "Telecom"

Changelog:

1. (new) Motion healthy function, can always see individual sports data, meter record every step you good health
2, (new) fingerprint answer the phone function, a touch, the call is connected, the caller communication quick step
3, (new) public telecommunications security requirements, increasing security center, traffic treasure, communications security stable step
4, (optimization) updated with the latest security patches Google
5, (optimization) camera to adjust to the fingerprint fingerprints, photographs switch settings
6, (optimization) game centers and other applications can now uninstall

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B126SP06 – MT7-CL00 "Telecom"

Changelog:

1, (optimization) GOOGLE updated security patches, to prevent the destruction of data, so that your phone is in a safer state
2, (Optimized) system stability, and make your system run more stable
3, (optimization) camera display, so you get a better experience in the photo process

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B126 – MT7-CL00 "Telecom"

Changelog:

1, (optimization) updated with the latest security patches Google
2, (optimization) weather widget screen, display more friendly

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B125 – MT7-CL00 "Telecom"

Changelog:

1, (optimization) updated with the latest security patches Google
2, (optimization) NFC compatibility enhancements
3, (solve) the adaptation of the Russian permanent Winter Time Zone
4, (solve) the problem contact a specific scene show NULL

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B123 – MT7-CL00 "Telecom"

Changelog:

1. (optimization) boot speed multi-contact situations contacts
2. (optimization) Bluetooth, WLAN compatibility
3. (optimization) of the screen displays
4. (optimization) updated with the latest security patches Google

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B122 – MT7-CL00 "Telecom"

Changelog:

1. (optimization) WLAN compatibility
2. (new) desktop font size changes with the system font size
3. (optimization) fit into google patches, enhanced machine stability

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B121 – MT7-CL00 "Telecom"

Changelog:

1. (optimization) speed fingerprint to unlock
2. (new) anti-error trigger mode
3. (optimization) machine stability

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B120SP08 – MT7-CL00 "Telecom"

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B120SP07 – MT7-CL00 "Telecom"

————————————————————————————————————————————————————————————–

Update Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B120 – MT7-CL00 "Telecom"

————————————————————————————————————————————————————————————–

Official ROM HUAWEI Ascend Mate 7 MT7-CL00 Telecom Version: MT7-V100R001C92B119 – MT7-CL00 "Telecom"

Google service&login include – No Rooted

Language support: MultiLang

ROM install :

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

or

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<

About:

SlimRoms is a custom android operating system built from Android Open Source Project (AOSP). Our aim is to offer a clean, fast and high-quality experience on all your devices.

SlimRoms simplifies the Android experience while reducing a lot of the unnecessary overhead that might be found within. As such, it provides a good experience for most Android purists and those who are looking to bring an older device out of the dark ages and back into the golden light of Android.

SlimRoms offer you the choice of just exactly how bare bones you want to go with a ROM. When you download the ROM, you’re given with the choice between three different versions of Google Apps: a mini-version that is limited to basic services (such as the login services), a normal variant that includes Search, Music, and YouTube, and a full version that also provides Chrome, Drive, and all the other Google Apps you’ve come to love.

What's working :

•        Wifi (Works but unstable)
•        RIL (Calls, SMS, Data)
•        Audio
•        Camera: Still photos & Video Recording
•        GPS
•        Bluetooth
•        Media: Video playback (Software codecs)

What's not working:

•        Media: Video playback (Hardware codecs)
•        FM Radio
•        ???

Credits:

•     SlimRoms Team
•     Dazzozo
•     fonz93
•     TeamHackLG
•     Christopher83
•     moddingg33k
•     mrg666
•     … and many more contributors!

To install this ROM, unlocked bootloader and custom recovery (TWRP 2.6.3.3 or higher) are required.

>>> IMPORTANT: every income generated from this post goes *directly* to an EU noprofit organization that supports the open source scene (enjoy) <<<

About:

SlimRoms is a custom android operating system built from Android Open Source Project (AOSP). Our aim is to offer a clean, fast and high-quality experience on all your devices.

SlimRoms simplifies the Android experience while reducing a lot of the unnecessary overhead that might be found within. As such, it provides a good experience for most Android purists and those who are looking to bring an older device out of the dark ages and back into the golden light of Android.

SlimRoms offer you the choice of just exactly how bare bones you want to go with a ROM. When you download the ROM, you’re given with the choice between three different versions of Google Apps: a mini-version that is limited to basic services (such as the login services), a normal variant that includes Search, Music, and YouTube, and a full version that also provides Chrome, Drive, and all the other Google Apps you’ve come to love.

What's working :

•        Wifi (Works but unstable)
•        RIL (Calls, SMS, Data)
•        Audio
•        Camera: Still photos & Video Recording
•        GPS
•        Bluetooth
•        Media: Video playback (Software codecs)

What's not working:

•        Media: Video playback (Hardware codecs)
•        FM Radio
•        ???

Credits:

• chil360 *author*
• Dazzozo
• legaCyMod
• SlimRoms
• Ceastel
• Christopher83
• moddingg33k
• TeamHackLG
• mrg666

To install this ROM, unlocked bootloader and custom recovery (TWRP 2.6.3.3 or higher) are required.