Honor 5X KIW-CL00

December 7, 2015, 4:23 pm

≫ Next: Honor 5X KIW-UL00

≪ Previous: Honor 5X KIW-TL00

ROM Phone HUAWEI Honor 5X KIW-CL00 – ROM Android 5.1.1

ONLY Qualcomm Snapdragon 616 MSM8939v2

Official ROM HUAWEI Honor 5X KIW-CL00 version: EMUI3.1 – KIW-CL00-C92B140 – Telecom

Google service&login include – No Rooted

Language support: EN/CN

Install ROM:

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

Honor 5X KIW-UL00

December 7, 2015, 4:30 pm

≫ Next: 4.2.1 LOLLIPOP DESIGN By gooddeath

≪ Previous: Honor 5X KIW-CL00

ROM Mobile HUAWEI Honor 5X KIW-UL00 – ROM Android 5.1.1

ONLY Qualcomm Snapdragon 616 MSM8939v2

Official ROM HUAWEI Honor 5X KIW-UL00 version: EMUI3.1 – KIW-UL00-C00B140 – Unicom

Google service&login include – No Rooted

Language support: Multilang

Install ROM:

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

4.2.1 LOLLIPOP DESIGN By gooddeath

December 8, 2015, 7:17 am

≫ Next: HONOR 7 PLK-L01

≪ Previous: Honor 5X KIW-UL00

in the name of God
This ROM is very beautiful and functional
I use three days and I did not see any problem with this ROM

Can be installed on g700-u00 & -u10

Make BackUp From your ModeM.img

↧

HONOR 7 PLK-L01

December 9, 2015, 5:14 am

≫ Next: HUAWEI MediaPad X2 GEM-703L

≪ Previous: 4.2.1 LOLLIPOP DESIGN By gooddeath

OFFICIAL ROM FOR HUAWEI HONOR 7 PLK-L01 – EMOTION UI 3.1 -

Gapps included — No rooted

Language : Multilang

How to install :

1. Prepare an SD card, bigger than 2 GB

2. (OPTIONAL STEP) Format SD card

3. Create a new folder in the SD card, named "dload"

4. Copy the file "UPDATE.APP" into the dload folder

5. Put your SD card into the phone

6. Go to Settings>General>Updater

7. In the page of the Updater tap on Menu(at the bottom of the screen) and now tap on "local update"

8. Now select UPDATE.APP that you see on the screen

YOU WILL SEE THE PROGRESS BAR AND AFTER THAT THIS IS COMPLETE THE PHONE WILL RESTART.

It's reccomended to perform a format after the update.

↧

HUAWEI MediaPad X2 GEM-703L

December 9, 2015, 8:51 am

≫ Next: P8Max DAV-703L

≪ Previous: HONOR 7 PLK-L01

ROM HUAWEI MediaPad X2 GEM-703L – ROM Android 5.1

Update Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 1, V100R001C233B111 - Android 5.1

————————————————————————————————————————————————–

Update Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 1, V100R001C233B109 - Android 5.1

Changelog	Select Show>
Language support: Multilang

————————————————————————————————————————————————–

Update Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 0.5, V100R001C233B015 – Android 5.0

Changelog	Select Show>
[New features] (New) freeze process technology to optimize process management, standby more durable (New) during a call to allow the power key bright screen [Radio] (Optimization) radio part radio noise problem [Display] (Optimization) for a long time to play the game screen flickering [Communications] Under (repair) particular scene very low probability telephone bobble problem Very low probability (repair) particular scene out network problems [Third-party applications] (Repair) set as the default third-party messaging applications can not receive text messages (Fix) Some applications can not boot from the startup problems (Repair) of third-party applications to detect rear camera parameters display incorrect

Changelog

Select Show>

————————————————————————————————————————————————–

Update Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 0.5, V100R001C233B012 - Android 5.0

Changelog	Select Show>
[Camera] (Optimization) to improve focus speed and accuracy of focus (Optimization) to improve the rear camera sharpening effect under different scenarios (Optimization) to improve the stability of the micro-channel video chat exposure scenarios (Optimization) the improvement of light-colored object camera preview interface effects Wifi and Bluetooth (Optimization) connection stability Wifi Direct Connect application (Optimization) to improve connectivity Bluetooth headset to listen to music sound intermittent problem (Repair) Wifi cut data traffic no longer prompt message box checked, the problem will continue to pop up the lower part of the scene [Communications] Under (repair) particular scene very low probability telephone bobble problem [System] (Optimization) in low ambient light brightness light-sensitive strategy to avoid frequent switching screen brightness (Optimization) to improve the brightness of ambient light low screen brightness By using the radio (optimization) holster mode, sound volume can be adjusted up and down buttons (Optimization) You can delete preset video and music resources (Optimization) together into google the latest security patches, enhanced system stability (Repair) in special low probability scenarios crash problem (Fix) Some applications (third party packers) After OTA upgrade flash back problems [Mail] (Optimization) Mail landing can not enter full-format address (Repair) vertical screen use and then switch to horizontal screen, click on the mailing list can not switch problem [Gallery] (Restoration) of the motion picture can not be playback problems gif [Voice wake] (Fix) When you wake holster mode voice, can not find a problem with the phone's voice commands [Alarm] Interface layout (optimization) alarm clock to unlock the region [Mobile butler] (Repair) can not add QQ, the Bank applied problems phones butler application lock [Third-party applications] (Repair) can not log drops taxi driver-side application problem

Changelog

Select Show>

[Camera]
(Optimization) to improve focus speed and accuracy of focus
(Optimization) to improve the rear camera sharpening effect under different scenarios
(Optimization) to improve the stability of the micro-channel video chat exposure scenarios

(Optimization) the improvement of light-colored object camera preview interface effects

Wifi and Bluetooth
(Optimization) connection stability Wifi Direct Connect application
(Optimization) to improve connectivity Bluetooth headset to listen to music sound intermittent problem
(Repair) Wifi cut data traffic no longer prompt message box checked, the problem will continue to pop up the lower part of the scene

[Communications]
Under (repair) particular scene very low probability telephone bobble problem

[System]
(Optimization) in low ambient light brightness light-sensitive strategy to avoid frequent switching screen brightness
(Optimization) to improve the brightness of ambient light low screen brightness
By using the radio (optimization) holster mode, sound volume can be adjusted up and down buttons
(Optimization) You can delete preset video and music resources
(Optimization) together into google the latest security patches, enhanced system stability
(Repair) in special low probability scenarios crash problem
(Fix) Some applications (third party packers) After OTA upgrade flash back problems

[Mail]
(Optimization) Mail landing can not enter full-format address
(Repair) vertical screen use and then switch to horizontal screen, click on the mailing list can not switch problem

[Gallery]
(Restoration) of the motion picture can not be playback problems gif

[Voice wake]
(Fix) When you wake holster mode voice, can not find a problem with the phone's voice commands

[Alarm]
Interface layout (optimization) alarm clock to unlock the region

[Mobile butler]
(Repair) can not add QQ, the Bank applied problems phones butler application lock

[Third-party applications]
(Repair) can not log drops taxi driver-side application problem

————————————————————————————————————————————————–

Update Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 0.5, V100R001C233B009 - Android 5.0

Changelog	Select Show>
[New features] Increase the sources and application compatibility when prompted to install [Camera] (Optimization) Optimization window mode leather, leather camera startup mode by the slide change button triggers, reducing inadvertently (Optimization) to adjust the camera focus and white balance parameters to optimize camera effects (Optimization) optimized low-light camera effects scene [WLAN Bluetooth] (Optimization) to improve the stability of the WLAN connection (Optimization) lower part of the scene Bluetooth headset Caton problem [Alarm] (Repair) addressing the low probability shutdown alarm clock did not go off, the alarm notification bar prompts the question obsolete [Communications] (Optimization) that may occur during the call echo problem When (optimized) copy number of messages paste content is consistent with the order received (Repair) to solve the problem of an extremely low probability of out of network Under (repair) resolve the dual card case specific scene Unicom 4G data service instability [Third-party applications] (Optimized) part of the application compatibility issues (Repair) to solve the micro-channel video call probabilistic flickering problems (Repair) solutions Jingdong at reduced or enlarged mode Caton problem (Fix) After default setting to input Sogou input method, low probability changed back to the default input method problem [Stability] (Optimization) to enhance system stability, lower part of the scene to solve the low probability of crash restart problem

Changelog

Select Show>

————————————————————————————————————————————————–

Official ROM HUAWEI X2 GEM-703L version: GEM-703L EMUI3 0.5, V100R001C233B006 - Android 5.0

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Look Tuto in the rom ( GEM-703L SD.pdf )

↧

P8Max DAV-703L

December 9, 2015, 8:54 am

≫ Next: Glory 4X Che-TL10 2G

≪ Previous: HUAWEI MediaPad X2 GEM-703L

ROM Mobile P8Max DAV-703L – ROM Android 5.1

ONLY KIRIN935 + 3G Ram

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B028 – Netcom

——————————————————————————————————————————————————

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B026 – Netcom

——————————————————————————————————————————————————

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B023 – Netcom

——————————————————————————————————————————————————

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B021 – Netcom

Changelog	Select Show>
[New] (New) multi-resolution third-party applications (Standard, zoom three models), application size, font sizes can be customized (Experience Path) Settings -> Applications display in experience (New) a key lock screen application After (experience path) upgrade is complete on the desktop last screen [Camera] (Optimization) photographed reddish part of the scene under [Communications] Under (repair) particular scene very low probability telephone bobble problem Very low probability (repair) particular scene out network problems [Audio] (Optimized) part when the music loud sound optimization [Desktop] (Optimized) Desktop font settings with the system and change the font size [Split screen] (Optimization) increase third-party application whitelisting split screen, more applications can experience split-screen [System] (Optimization) together into google the latest security patches, enhanced system stability

Changelog

Select Show>

——————————————————————————————————————————————————

Update Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B017 – Netcom

——————————————————————————————————————————————————

Official ROM P8Max DAV-703L version: Emotion UI 3.1 - DAV-703L-V100R001C233B011 – Netcom

Google service&login include – No Rooted

Language support: Multilang

Install ROM:

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

Glory 4X Che-TL10 2G

December 10, 2015, 9:43 am

≫ Next: Huawei P8 lite ALE-L21

≪ Previous: P8Max DAV-703L

ROM Phone HUAWEI Glory 4X 2G Ram Mobile - ROM Android 5.0

Update Official ROM Glory 4X High version : CHE-TL10-C01B230 – EMUI3.1 - Mobile – 2G ram

———————————————————————————————————————————————————–

Official ROM Glory 4X High version : CHE-TL10-C01B210 – EMUI3.1 - Mobile – 2G ram

Changelog	Select Show>
Special repair small probability scenarios called Fails Special repair small probability scenarios call inaudible sound problems Special Scene repair small probability USB connection is not charging problem Optimize system performance, enhance the user experience

Gapps not include – No Rooted

Language support: EN/CN

ROM install :

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

Huawei P8 lite ALE-L21

December 10, 2015, 12:08 pm

≫ Next: Ascend P7 Full B839 Lollipop 5.1.1 Firmware

≪ Previous: Glory 4X Che-TL10 2G

Firmware Details

Device: Huawei P8 Lite (Single-SIM)
Model: ALE-L21
Android: v5.0.1 Lollipop
EMUI: 3.1
Firmware: B171
Build: ALE L21C432B171
Region: Europe
Country: Hungary
Date: 20.11.2015
Branding: European general version
File Name: ALE-L21C432B171(Single-SIM eu common).rar

↧

Ascend P7 Full B839 Lollipop 5.1.1 Firmware

December 10, 2015, 12:36 pm

≫ Next: Huawei Honor 4X (L11) B130 KitKat Firmware [Cambodia]

≪ Previous: Huawei P8 lite ALE-L21

Firmware Details

Device: Huawei Ascend P7
Model: P7-L10
Codename: Sophia-L10
Android: v5.1.1 Lollipop
Firmware: B839
Build: P7-L10C900B839
EMUI: 3.1
Region: Europe
Countries: Germany/Spain
Date: 18.11.2015
Status: Official (Stable)
Type: Full firmware image
Size: 1.26 GB

↧

Huawei Honor 4X (L11) B130 KitKat Firmware [Cambodia]

December 10, 2015, 2:09 pm

≫ Next: Ascend Mate 7 (L09) B327 Lollipop 5.1.1 Firmware

≪ Previous: Ascend P7 Full B839 Lollipop 5.1.1 Firmware

Firmware Details

Device: Huawei Honor 4X
Model: Che2-L11
Codename: CherryPlus
Android: v4.4.2 KitKat OS
EMUI: 3.0
Firmware: B130
Build Number: V100R001C541B130
Region: Asia
Countries: Cambodia/Myanmar
Date: 4.12.2015
Status: Official
Code: 05013FKK
Type: Full firmware image
File Name: CherryPlus-L11_V100R001C541B130_Firmware_Myanmar_Channel-Others_Andriod 4.4.2_EMUI 3.0_05013FKK.zip

How to Install

This firmware will only work on Che2-L11 with C541Bxx build number.
Download the firmware from the official mirror provided above.
Extract the contents of this Zip package on your computer.
Now plug your Honor 4X into the PC in MTP mode. Make sure you’ve already taken a backup of your apps and data.
Copy the extracted ‘dload’ folder (step 3) to the main directory of your phone’s external microSD card.
Finally open the Updater app, go to menu > Local Update, tap the full Update.app package and install it.
Your device will automatically reboot into its recovery and flash the new firmware.

↧

Ascend Mate 7 (L09) B327 Lollipop 5.1.1 Firmware

December 10, 2015, 2:10 pm

≫ Next: Huawei Mate S (L13) B115 Lollipop v5.1 Firmware

≪ Previous: Huawei Honor 4X (L11) B130 KitKat Firmware [Cambodia]

Firmware Details

Device: Huawei Ascend Mate 7
Model: MT7-L09
Android: v5.1.1 Lollipop
EMUI: 3.1
Firmware: B327
Build: MT7-L09C900B327
Region: Latin America
Country: Colombia
Date: 3.11.2015
Status: Official
Type: Full firmware image
Branding: General version
File Name: MT7-L09_C900B327_General Version_Android 5.1.1_EMUI 3.1.rar
only model MT7-L09

↧

Huawei Mate S (L13) B115 Lollipop v5.1 Firmware

December 11, 2015, 7:28 am

≫ Next: Huawei Watch LCB43B OTA Zip [Europe]

≪ Previous: Ascend Mate 7 (L09) B327 Lollipop 5.1.1 Firmware

Firmware Details

Device: Huawei Mate S
Model: CRR-L13
Android: v5.1 Lollipop OS
EMUI: 3.1
Firmware: B115
Region: Asia Pacific
Country: Malaysia
Date: 16.11.2015
Status: Official (Stable)
Code: 05013FNR
Type: Full firmware image
File Name: CRR-UL00_C470B115_Firmware_Southern_Pacific_Region_Channel-Others_Android_5.0_EMUI_3.1_05013FNR.zip

Installation Instructions

The firmware package already contains the update instructions, but here’s a general outline of the steps you’ll be following.

Download “CRR-UL00_C470B115_…05013FNR.zip” from above and extract its contents. You’ll get a ‘dload’ folder.
Connect your Mate S to your PC in file transfer (MTP) mode.
Using HiSuite or the inbuilt app take a full backup of all your important steps.
Transfer the extracted ‘dload’ folder (Step 1) to the main folder of your Mate S’s internal memory or external microSD card.
After that, disconnect the USB cable and open the Updater app.
Go to Menu > Local Update, select the full Update.app package and confirm its installation.
Your phone will automatically reboot and flash the new firmware.

↧

Huawei Watch LCB43B OTA Zip [Europe]

December 11, 2015, 7:29 am

≫ Next: CyanogenMod 21.1 for Huawei Y300

≪ Previous: Huawei Mate S (L13) B115 Lollipop v5.1 Firmware

OTA Details

Device: Huawei Watch
OS: Android Wear v1.3
Android: v5.1.1 Lollipop
Firmware: LCB43B
Region: Europe
Country: Germany
Date: 27.11.2015
Status: Official (Stable)
Type: Incremental (delta) OTA
File Name: Update.zip

Installation Instructions

You should have ADB, Fastboot and Huawei USB drivers installed on your PC. You can use the minimal ADB toolkit too.
Download the OTA package ‘update.zip’ from above and place it in the same folder as ADB.
Connect your watch with the computer. Make sure USB Debugging is enabled on the watch in developer options.
Now open a command window in the ADB folder (Shift + RMB > Open command window here).
Execute this command to verify the USB connection: adb devices
Now reboot into fastboot mode: adb reboot bootloader
When your watch reboots into the bootloader, enter the recovery and select the sideload option.
Finally execute this command to push the update: adb sideload update.zip
ile Name: Update.zip

Driver adb minimal fastboot

http://www.filedropper.com/minimaladbfastbootv131setup

↧

CyanogenMod 21.1 for Huawei Y300

December 12, 2015, 6:14 am

≫ Next: Play 4X glory Unicom high version (Che2-UL00)

≪ Previous: Huawei Watch LCB43B OTA Zip [Europe]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.X.X (Lollipop), which is designed to increase performance and reliability over stock Android for your device.

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below there is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.

What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).

What's working :

RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera ( Photos )
Audio ( Record and Playback )
Sensors
Flash
Led
Video playback (software)

What's not working :

Video playback (hardware)
FM Radio
Sometimes you can get a black screen while resuming from sleep, the cause is still unknown
Sometimes, trying to upload a file can cause a random reboot
Random camera errors, reboot your phone and it will work again.

Instructions :

Download the latest build and gapps
Reboot to recovery (TWRP 2.6.3.3 required)
Flash the latest build and gapps
Reboot

↧

Play 4X glory Unicom high version (Che2-UL00)

December 12, 2015, 8:49 am

≫ Next: Play 4X glory Unicom high version (Che2-UL00) Version: 5.12.1 [EMUI3.1_Android5.1]

≪ Previous: CyanogenMod 21.1 for Huawei Y300

ROM install :

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

Play 4X glory Unicom high version (Che2-UL00) Version: 5.12.1 [EMUI3.1_Android5.1]

December 12, 2015, 9:02 am

≫ Next: CyanogenMod 12.1 for Huawei Y300

≪ Previous: Play 4X glory Unicom high version (Che2-UL00)

ROM install :

Step Six: The upgrade process progress bar shows after the finish of the pending progress bar, the phone automatically restart.

Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
Step Two: Formatting SD card (optional).
The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
Step four: Check the root directory of the SD card you dload UPDATA.APP.
Step Four: cell phone turned off, insert the SD card, while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure

Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.

↧

CyanogenMod 12.1 for Huawei Y300

December 12, 2015, 6:14 am

≫ Next: Huawei P8 B313 Marshmallow OTA Zip [Beta] [EMUI 4.0]

≪ Previous: Play 4X glory Unicom high version (Che2-UL00) Version: 5.12.1 [EMUI3.1_Android5.1]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.X.X (Lollipop), which is designed to increase performance and reliability over stock Android for your device.

RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera ( Photos )
Audio ( Record and Playback )
Sensors
Flash
Led
Video playback (software)

What's not working :

Video playback (hardware)
FM Radio
Sometimes you can get a black screen while resuming from sleep, the cause is still unknown
Sometimes, trying to upload a file can cause a random reboot
Random camera errors, reboot your phone and it will work again.

Instructions :

Download the latest build and gapps
Reboot to recovery (TWRP 2.6.3.3 required)
Flash the latest build and gapps
Reboot

↧

Huawei P8 B313 Marshmallow OTA Zip [Beta] [EMUI 4.0]

December 13, 2015, 5:34 am

≫ Next: Honor 7 (L01) B120 Lollipop Firmware [Russia]

≪ Previous: CyanogenMod 12.1 for Huawei Y300

OTA Details

Device: Huawei P8
Model: GRA-L09
Android: v6.0.0 Marshmallow
EMUI: 4.0
Firmware: B313
Build: GRA-L09C432B313
Required Version: B200
Region: Europe
Date: 12.12.2015
Status: Official (beta)
Type: Incremental OTA
File Name: update.zip

How to Update

To install this OTA, your device already needs to be running the C432B200 firmware onboard.
Download the OTA Zip package from the link provided above and make sure it’s named as ‘update.zip’.
Copy ‘update.zip’ to your phone’s external microSD card inside a folder named ‘dload’ (you can create one).
After that, disconnect the USB cable and open the Updater app.
Tap menu > Local update, choose the update.zip package and flash it.
Your P8 will automatically reboot into its recovery and flash the new update.
Remember, it’s a beta, so it is up to you to back up your important stuff somewhere safe to avoid data loss in any unforseen circumstances.

↧

Honor 7 (L01) B120 Lollipop Firmware [Russia]

December 13, 2015, 5:34 am

≫ Next: Nexus 6P B101 Marshmallow Stock Firmware [Nin-A22] [MDB08K]

≪ Previous: Huawei P8 B313 Marshmallow OTA Zip [Beta] [EMUI 4.0]

Firmware Details

Device: Huawei Honor 7
Model: PLK-L01
Android: v5.0 Lollipop
EMUI: 3.1
Firmware: B120
Build: PLK-L01C10B120
Date: 19.11.2015
Region: Europe
Country: Russia
Code: 05013EBM
Status: Official
Type: Full firmware image
File Name: PLK-L01_C10B120_Firmware_Russian Federation_Channel-Others_Andriod 5.0_EMUI 3.1_05013EBM.zip

Installation is quite simple. Upon extracting the Zip package you’ll get a folder named ‘dload’. Simply transfer ‘dload’ to the main directory of your phone’s SD card.

After that just open the Updater app, go to menu > Local update, tap the full Update.app package and flash it. Installation usually takes up to 5 minutes.

↧

Nexus 6P B101 Marshmallow Stock Firmware [Nin-A22] [MDB08K]

December 13, 2015, 5:35 am

≫ Next: Huawei Ascend Y625 – U32V100R001C328B105 _ Build 08 June 2015

≪ Previous: Honor 7 (L01) B120 Lollipop Firmware [Russia]

Firmware Details

Device: Huawei Nexus 6P
Model: Nin-A22
Android: v6.0 Marshmallow
Firmware: B101
Build Number: Nin-A22C00B101
Version: MDB08K
Status: Official
Type: Full firmware image
Region: Asia Pacific
Country: Philippines
Language: English
File Name: Huawei Nexus 6P Firmware(Nin-A22, Android 6.0, C00B101, English).zip

As a reminder, you can only install this firmware on the Nin-A22 model with C00 market number. The Zip package contains both the factory image and the Update.app package.

To flash the factory image:

Reboot your Nexus 6P into fastboot mode by holding Vol down + Power after turning it off.
Connect your Nexus 6P to the computer. Make sure you have the latest USB and ADB drivers installed.
Then on your PC, extract the Zip package and go to Software > MDB08K-release > signed-angler-img-2343511-factory-build.
If the bootloader is locked execute ‘device_unlock.bat’. Otherwise, just skip this step.
Next, execute ‘flash_all_and_device_lock.bat’ to automatically flash all the images and relock the bootloader.

↧